Добро пожаловать на Форум по станкам с ЧПУ!

Постпроцессор для Gerber Sabre 408

Тема в разделе "Программное обеспечение станков ЧПУ", создана пользователем alfa24, 27 май 2014.

  1. alfa24

    alfa24 New Member

    Регистрация:
    26 май 2014
    Сообщения:
    1
    Симпатии:
    0
    Здравствуйте. У меня вопрос по постпроцессору для станка Gerber Sabre 408. Из списка постпроцессоров в Artcam используем D200, но шпиндель не слушается задаваемых оборотов.
    Может быть причина здесь?

    ;
    ; Gerber GSP output for use by ArtCAM Gerber Spooler
    ;
    ; History
    ;
    ; Who When What
    ; === ======== ========================================
    ; BEM 06/04/98 Written for Gerber
    ; bem 21/03/00 Added DESCRIPTION and FILE_EXTENSION fields
    ; JAB 18/12/01 Changed feedrate multiplier to be correct for D200
    ;
    DESCRIPTION = "Gerber D200(*.ger)"
    ;
    FILE_EXTENSION = "ger"
    ;
    ; All output units in inches
    ;
    UNITS=INCH
    ;
    ; Cariage return - line feed at end of each line
    ;
    END_OF_LINE = "[13][10]"
    ;
    ;RAPID_FEED_RATE = 600
    ;
    ; Set up default formating for variables
    ;
    ; Spindle Speed
    FORMAT = [S|@||1.0]
    ; Feed Rate
    FORMAT = [FC|@||1.0|1.0]
    FORMAT = [FP|@||1.0|1.0]
    ; Tool moves in x,y and z
    FORMAT = [X|@||1.5]
    FORMAT = [Y|@||1.5]
    FORMAT = [Z|@||1.5|-1.0]
    ; Home tool positions
    FORMAT = [XH|@||1.5]
    FORMAT = [YH|@||1.5]
    FORMAT = [ZH|@||1.5]
    ; Tool Number
    FORMAT = [T|@||1.0]
    ;
    ;
    ;
    ; Set up program header
    ;
    ;START = "#T[TOOLDESC]"
    ; initialize selected axis (all axis)
    START = "#R4000"
    ; Tool select - pen
    START = "#R4100"
    ; Set Tool up position z= 0.25
    START = "#R49000061A8"
    START = "#MJob Start. Load Matl"
    START = "#L[XMIN] [YMIN] [ZMIN] [XMAX] [YMAX][ZMAX]"
    ; Tool select - cut
    START = "#R4101"
    ; initialize selected axis (z axis)
    START = "#R4001"
    ; Tool description and spindle speed
    START = "#M[T]:[TOOLDESC] < R.P.M>"
    ; Set Tool Down Position
    START = "#R4A00000001"
    START = "#F[FC]"
    START = "#P[FP]"

    ;START = "#C[FILENAME]: Press START"
    ;START = "#N[T]"
    ;START = "#S"
    ;START = "#P[FP]"
    ; Output raw gerber commands
    ;
    ; Program moves
    ;
    ; Rapid rate
    ;FIRST_RAPID_RATE_MOVE = "#F[F][13][10]#A[X] [Y] [Z]"
    ;RAPID_RATE_MOVE = "#A[X] [Y] [Z]"

    RAPID_RATE_MOVE = "#A[X] [Y] [Z]"
    FEED_RATE_MOVE = "#B[X] [Y] [Z]"
    PLUNGE_RATE_MOVE = "#C[X] [Y] [Z]"
    RETRACT_MOVE = "#D[X] [Y] [Z]"

    ;
    ; Feed Rate
    ;
    ;FIRST_FEED_RATE_MOVE = "#F[F][13][10]#B[X] [Y] [Z]"
    ;FEED_RATE_MOVE = "#B[X] [Y] [Z]"
    ;
    ; End of file
    ;
    ;
    ; Toolchange moves (only output for 2nd and later tools )
    ;
    TOOLCHANGE = "#M[T]:[TOOLDESC] < R.P.M>"
    TOOLCHANGE = "#F[FC]"
    TOOLCHANGE = "#P[FP]"
    alfa-kg@mail.ru
    Редактировать сообщение